Textbook Bonding Glue , EVA Hot Melt Adhesive For Binding Machines
NNL-36 Hot Melt Adhesive is special designed for bookbinding (
spine glue ), paper products, newspaper, and notebooks etc, which
properties are: short setting time, good permeability, excellent
adhesion, fast bonding, etc.
|Name||Hot Melt Adhesive|
|Suggested running temperature||165-175°C|
|Validity period||18 months|
|Storage environment||Clean and dry environment|
|Packing||25kg/bag, pack in poly bag|
Within two weeks after receiving 30%
T/T 30% deposit before production,
the balance against the copy of B/L.
L/C also can be accepted.
What are hot melt polyamide adhesives?
Hot melt polyamide adhesives are solid adhesives at room
temperature, contain absolutely no water and solvents, and are
mainly composed of thermoplastic resin. Generally speaking, hot
melt coaters, known as applicators, are used to melt hot melt
adhesives. Guns are used to apply these adhesives in their liquid
state to the adherend, which is then crimped, cooled, and adhered.
The time required to complete the adhering process is only the time
required to cool and solidify the adhesive, which makes it possible
to adhere objects to each other in a few seconds to a few minutes.
What can you tell me about the open time and setting time?
Hot melt adhesives melt under high temperatures. You have to apply
these adhesives to an object and adhere another object to it before
these adhesives cool and lose their adhesive properties. The open
time is the period of time from when the adhesive is applied to the
adherend to when the adhesive cools to the point that it loses its
adhesive properties. The open time is normally a length of time
from a few seconds to a few minutes and is determined on the basis
of the usage conditions, ambient environment, and hot melt adhesive
mixture. The setting time is the period of time until the hot melt
adhesive applied to the adherend cools, solidifies, and exhibits
its initial adhesive strength.
1.Suggested application temperature 150~170°C, avoid processing
over high temperature (≥180°C) for long time;
2.Please adjust temperature of hot melt tank and speed of hot melt
machine in time based on different operation conditions (include
environmental temperature ,fluidity and gluing time of glue) ;
3.Regularly clean up the leftover and impurity in hot melt tank;
4.Do not mix with other glue from different producers;
5.Avoid using glue that out of season, especially avoid summer's
glue being used in winter.